S300 Structural Metal Epoxy for Aluminum & Steel, Cold Weld, 1.69 oz

About this item

• 1.REPAIR BEFORE REPLACE: AOJEL S300 is a 2-part structural metal epoxy system and aluminum repair epoxy for prepared aluminum, steel, stainless steel, cast iron and cast aluminum; rebuilds rigid brackets, housings and castings
• 2.CONTROL THE MIX, TRUST THE REPAIR: AOJEL Repair Control 7-Step Protocol: PREPARE, PURGE, MIX, BUILD, ALIGN, CLAMP, CURE; purge until Parts A and B flow evenly, discard the first uneven bead, then mix true 1:1 until uniform
• 3.30 MINUTES TO GET IT RIGHT: The AOJEL 30 / 3-4 / 24 System gives up to 30 minutes at 77°F/25°C to fill, build, position, align and clamp; 3-4 hours to initial set; at least 24 hours before loading or finishing
• 4.COLD-WELD ALTERNATIVE, AOJEL BUILT-REPAIR METHOD: Rebuild rigid metal without flame, sparks or welding setup; extend beyond the damage, build a hard repair body and reinforce load-bearing rigid repairs with a metal patch, mesh or bracket when needed
• 5.BUILT TO RETURN PARTS TO SERVICE: After full cure, S300 is waterproof, oil resistant and heat resistant up to 392°F; the cured repair is drillable, sandable, fileable, shapeable and paintable
• 6.KEEP USEFUL PARTS WORKING: For cracked castings, pot metal, stripped bolt or thread holes, worn rigid parts and prepared non-pressure exterior oil-pan or crankcase areas; restore function, reduce downtime and avoid unnecessary replacement
• 7.PREP ONCE, MAKE THE REPAIR COUNT: Degrease and roughen the metal, dry-fit parts and stage clamps or reinforcement before mixing; cleaner application, easier alignment and fewer rushed decisions make the result more predictable
• 8.EVERYTHING NEEDED TO START: Includes one 1.69 oz / 50 ml dual cartridge, push rod and spatula; no extra applicator is required for standard repairs; a compatible dual-cartridge dispensing gun adds control for repeated or larger jobs
• 9.CONTROL THE QUANTITY, KEEP REPAIR WITHIN REACH: Mix only what the job requires, recap the cartridge and store unmixed epoxy as directed; ideal for localized repairs; larger build-ups or multiple parts may need additional packs
• 10.HONEST ENGINEERING, CLEAR LIMITS: For rigid metal repairs only; not for PE, PP, PTFE, silicone, soft plastics, flexible or moving parts, torsion loads, fuel or brake lines, exhaust manifolds, internal engine cracks or pressure-critical systems

Overview

• Brand: AOJEL
• Specific Uses For Product: Metal Repair Aluminum Repair Structural Repair Pipe Repair Tool Repair Automotive Repair Equipment Repair Casting Repair Bracket Repair Housing Repair Metal Repair Aluminum Repair Structural Repair Pipe Repair Tool Repair Automotive Repair Equipment Repair Casting Repair Bracket Repair Housing Repair
• Material: Epoxy Metal-Filled Epoxy
• Item Form: Epoxy
• Special Feature: Load-Bearing, Waterproof, Heat Resistant to 392°F, Drillable After Cure, Longer Working Time Compatible Materials: Metal, Aluminum, Cast Iron, Stainless Steel Finish After Cure: Drillable, Sandable, Fileable, Paintable Recommended Uses: Rigid structural repair for brackets, housings, frames, tools, pipes, fittings Load-Bearing, Waterproof, Heat Resistant to 392°F, Drillable After Cure, Longer Working Time Compatible Materials: Metal, Aluminum, Cast Iron, Stainless Steel Finish After Cure: Drillable, Sandable, Fileable, Paintabl… See more